Revalidation of MCA STCW95 CoCs
All MCA STCW95 CoCs must be revalidated every 5 years.
This is an administrative process, which requires you to download a form from the MCA website. Click here to access the form on the MCA website.
You will need to submit your CoC, a valid ENG1 medical certificate, testimonials and certificate of discharge showing at least 12 months yacht service in the past 5 years.
Deck CoCs - you will need to prove that you have served as a master or deck officer in any seagoing ship (other than fishing vessels) of more than 80 gross tonnes or 24 metres in length for at least 12 months within the last five years
Engineering CoCs - you will need to prove that you have served as an engineer officer on any sea-going ship of at least 350 kilowatts power for at least 12 months within the last five years
The STCW Convention 1978 has been amended by the 2010 Manila Amendments and contains new training requirements for all seafarers. Seafarers revalidating their Certificates of Competency (CoC) will be required to submit additional evidence to ensure their Certificate is valid for service on certain types of ships after 31 December 2016.
Click here to see how these changes affect you.
Updating-Refresher Training Requirements
The 2010 Manila Amendments to the STCW Code bring in new requirements for seafarers required to hold any of the following safety training courses:
• Personal Survival Techniques (STCW Table A-VI/1-1)
• Fire Prevention and Fire Fighting (STCW Table A-VI/1-2)
• Proficiency in Survival Craft and Rescue Boats Other Than Fast Rescue Boats (STCW Table A-VI/2-1)
• Proficiency in Fast Rescue Boats (STCW Table A-VI/2-2)
• Advanced Fire Fighting (STCW Table A-VI/3)
Seafarers required to hold any of the above certificates of proficiency shall, every five years, provide evidence of having maintained the required standard of competence, to undertake the tasks, duties and responsibilities specified in the above stated tables.
Seafarers revalidating their Certificates of Competency (CoC) after 1 January 2017 will be required to submit documentary evidence of having completed MCA approved updating-refresher training. There is no requirement to provide documentary evidence for having completed updating-refresher training if a seafarer applies for CoC revalidation before 1 January 2017.
From 1 January 2017 Port State Control Officers may require seafarers to provide documentary evidence of having maintained the required standard of competence, to undertake the tasks, duties and responsibilities listed above.
Presenting the documentary evidence obtained on completing an MCA approved updating-refresher course will meet this requirement.
Details of updating-refresher training will be published in a Marine Information Notice soon.
Deck Certificate of Competency Revalidation, ECDIS requirements
The 2010 Manila Amendments to the STCW Code bring in the requirement for Deck Officers working onboard ships fitted with an Electronic Chart Display Information System (ECDIS) to undergo specific education and training.
As of 1 January 2012 seafarers requiring revalidation of UK CoCs issued in compliance with STCW Regulation II/1, II/2 and II/3 (maintain a safe navigational watch; use of ECDIS to maintain safety of navigation; and maintain the safety of navigation through the use of ECDIS and associated navigation systems to assist command decision making) need to comply with the new STCW requirements to ensure their CoC remains valid on ships fitted with ECDIS after 31 December 2016.
For the revalidation of UK CoC valid after 31 December 2016, the seafarer must have completed one of the following:
• MCA approved Navigation Radar and ARPA Simulator (NARAS)/ Navigation Aids and Equipment and Simulator Training (NAEST) (Operational Level) course completed on or after 1 January 2005; or
• MCA approved NARAS/ NAEST (Management Level) course completed on or after 1 January 2005; or
• MCA approved ECDIS course completed on or after 1 January 2005; or
• ECDIS simulator training course in compliance with IMO Model Course 1.27, accepted by the MCA and approved by an Administration whose CoC the MCA accept for the issue of a CEC.
The original course certificate must be submitted with the application. Deck Officers not meeting the above requirement will receive the following CoC limitation:
“From the 1 January 2017 this certificate is not valid for service on ships fitted with ECDIS”.
Deck Officers may subsequently request the removal of this limitation by providing documentary evidence of MCA approved ECDIS training
Engineering Certificate of Competency Revalidation, High Voltage (HV) requirements
The 2010 Manila Amendments to the STCW Code bring in the requirement for engineers to undergo education and training in High Voltage systems, at both the operational and management levels. This requirement comes into force on the 1 January 2017 but will affect the revalidation of Engineering Certificates of Competency (CoC) from 1 January 2012. There is no requirement for additional training to be undertaken by all existing Engineer Officers, whether or not they intend to work on ships having High Voltage systems. However, High Voltage training requirements will be incorporated in the future training programmes of Engineer Officers at both the operational and management levels.
No additional action is required for Engineer Officers who do not work on and do not intend to work on ships with High Voltage systems. These Engineer Officers will receive the following CoC limitation:
“From 1 January 2017 this certificate is not valid for service on ships fitted with High Voltage (over 1000V) systems”.
Engineer Officers who do not want this limitation placed on their CoC should read the following section applicable to their Certificate.
Note: A High Voltage (over 1000V) system is where voltage is generated and distributed at high voltage or transformed to and distributed at high voltage. It does not include systems where high voltage is utilised locally e.g. ignition systems, radio transmission, Radar and other navigational equipment.
EOOW CoC Reg. III/1 (Operational Level)
To avoid having the High Voltage limitation, Engineer Officers of the Watch will need to show compliance with the 2010 Manila Amendments. In addition to the current revalidation requirements, they will have to provide documentary evidence of:
• completion of High Voltage (HV) course(*); or
• completion of the following sea service in the engine room on vessels fitted with HV systems;
• six months in the preceding five years; or
• three months sea service during the last twelve months.
Sea service evidence can be provided in the form of a company letter signed by an authorised official within the company.
Second/Chief Engineer Officer CoC Reg. III/2 and III/3 (Management Level)
To avoid having the High Voltage limitation, Senior Engineer Officers will need to show compliance with 2010 Manila Amendments. In addition to the current revalidation requirements, they will have to provide documentary evidence of completion of High Voltage (HV) course (*).
* High Voltage Courses
Courses previously undertaken prior to 1 July 2013 do not need to be MCA approved but you must provide documentary evidence confirming the course covers at least the following topics:
at the operational level
• The hazards associated with High Voltage systems;
• The functional, operational and safety requirements for a marine high-voltage system;
• Basic arrangement of High Voltage systems and their protective devices;
• Safety procedures related to High Voltage systems; and
• Immediate actions to be taken under fault conditions.
at the management level
• The functional, operational and safety requirements for a marine high-voltage system;
• Assignment of suitably qualified personnel to carry out maintenance and repair of high-voltage switchgear of various types;
• Taking remedial action necessary during faults in a high-voltage system;
• Producing a switching strategy for isolating components of a high-voltage system;
• Selecting suitable apparatus for isolation and testing of high-voltage equipment;
• Carrying out a switching and isolation procedure on a marine high-voltage system, complete with safety documentation; and
• Performing tests of insulation resistance and polarization index on high-voltage equipment.
The original certificate and course syllabus must be submitted with the application.
Engineer Officers may subsequently request the removal of the High Voltage limitation by providing documentary evidence of a High Voltage training course that includes the required topics.
All Revalidation Applications will be processed by the Seafarer Training & Certification Branch (STCB) at the MCA Headquarters in Southampton. From this date all applications or revalidation enquiries should be sent to the following address:
Seafarer Training & Certification Branch
105 Commercial Road
Telephone Number +44 (0)2380 329231 - please select either option 1 for Deck Revalidations or option 2 for Engineering Revalidations